07-07
(1) The cylinder is a pneumatic system element that converts compression energy into mechanical energy. Hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy …
MORE >
07-07
1、 The reasons for unstable operation of hydraulic cylinder are as follows:(1) If the oil inlet pipe is blocked, dredge the oil inlet pipe and check whether it is caused by hydraulic oil. If so, judge…
MORE >07-07
Avoid air entering the hydraulic cylinder system. The oil used in the system has little compressibility, and it can be considered as incompressible under normal circumstances. However, the compressibil…
MORE >07-07
Hydraulic cylinder oil leakage is a headache for flood users, but this problem will still occur frequently. Leakage problems can be mainly divided into internal leakage and external leakage of sealing …
MORE >07-07
The hydraulic cylinder has simple structure and stable operation. When it is used to realize reciprocating motion, it can avoid the reduction device, and there is no transmission gap, so it is widely u…
MORE >07-07
With the deepening and popularization of hydraulic skills and the increasing expansion of application fields and occasions, hydraulic cylinders need to constantly put forward new requirements for the w…
MORE >07-07
There are two main reasons for the slow speed of the hydraulic cylinder when working, one is the cylinder itself, and the other is external reasons.Own reason:1. There is gas in the cylinder, which mak…
MORE >07-07
The oil cylinder manufacturer explained that the fatigue of hydraulic equipment will always exist in the daily operation process, so it is necessary to stop regularly for inspection and maintenance dur…
MORE >07-07
After using the hydraulic cylinder for a period of time, it is necessary to change the oil in the cylinder barrel of the hydraulic cylinder. When does the hydraulic cylinder need to change the oil? Wh…
MORE >07-07
Factors affecting the tightness of hydraulic cylinders1. Requirements for production processIf the manufacturers production technology is not good, it will directly affect this sealing performance. Bec…
MORE >